Mortar Rake Unit Z3 10×47 mm

Description Mortar Rake Unit Z3 10×47 mmMortar Rake Unit Z3 10×47 mm (Ø 10 mm, 47 mm skæredybde) from MurerPoint.dk Efficient removal of mortar in cement-based and lime hydraulic joints. Can be mounted directly on angle grinders or drill machines. Replaceable grout milling pins with carbide tips. Mounted directly on the M14 spindle. Danish quality tool for professional performance. NOTE, the Mortar Rake Unit: Delivered as individual pins or in tubes with 2 pieces when ordering 2 pieces. Larger quantities are delivered in boxes of 50 pieces with volume discount. Application of the Mortar Rake: Perfect for scraping away old or damaged mortar joints. Efficient removal of mortar in joints with or without cement content. Used with angle grinders (M14 thread) or rotary hammers. Maximum speed: 20,000 rpm. Three tungsten carbide blades with a cutting depth of 60 mm. Mortar rakes are available in various sizes: 8 mm, 10 mm, og 12 mm. Recommendation when choosing the diameter: Choose a diameter that is approximately 2 mm smaller than the joint you want to rout out. Use a joint milling unit with a cutting depth of 26 mm for regular rejointing. Mortar Rake Z3 – 8x47mm 3 Cutting for Angle Grinders as a Tool Set the sole of the grout router to a cutting depth of approximately 20 mm from the desired grout surface. Examination of the condition of the joints: Take a walk around your house and inspect the masonry for cracks, holes, or flaking. Check if the joints between the bricks are intact and fill the gaps effectively. Evaluate the surface of the joints and look for any holes caused by mason bees. Note any missing or damaged joints as well as cracks in the bricks. Repointing per square meter: Price approximately 500 DKK per square meter for professional execution by a trained bricklayer. MurerPoint.dk – Your specialist in tools for repointing and grout milling.