Kisling Ergo 4205 Low Strength (removable) Pipe Sealant with PTFE 50ml

Description Special grade for the sealing of conical or cylindrical pipe threads e.g. Whitworth threads according to DIN 2999 up to 3 inches. Product gives flexible film with an breaking elongation of more than 100%. The contained PTFE powder lowers the friction. Certified acc. to  DVGW (DIN EN 751-1) and NSF Standard ANSI 61 for use in commercial and residential drinking water systems not exceeding 82°C. NSF S2 (P1) listed for use in food processing areas. The Ergo 4205 is specifically formulated for sealing conical-cylindrical pipe joints with a diameter of up to three inches. The sealant contains Teflon which is easy to remove and can be used in the presence of pure oxygen up to 60 °C /10 bar. Specifications Viscosity: 40000 – 60000 mPas (spindle 6, 2,5 rpm)                15000 – 20000 mPas (spindle 6, 20 rpm) Density: 1.0 g/cm³ Initial Strength: 15-30 minutes Functional Strength: 1-3 hours Final Strength: 12 hours Hazard Free Increased health and safety at the workplace Minimisation of skin irritations and allergies Reduced environmental footprint Approvals WRAS Approved – BS6920-1:2000 and/or 2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. NSF – ANSI 61 = For use in contact with drinking water. NSF – P1 = Listed for use in food processing areas. DVGW / DIN EN751-1 = According to DVGW TRGI 2008, in Germany not allowed for use in household gas-installations. TIS_4205_e