Description A cutting compound designed to offer the maximum productivity on the toughest of Tooling and production Gel coat. Recommended for removal of p1500 scratches or finer Polishes to a high gloss finish Directions Sand out any defects within the production or tooling Gel with abrasives ranging from P800 When using Roar 900 compound on a new double sided mop, it is advisable to prime the mop head first. Apply amounts of Roar 900 onto either the wool mop or surface which requires rectifying and rub the mop in a circular motion so that the compound embeds in the mop Start the polishing machine slowly and allow the machine to reach a maximum speed of 2200 RPM Continue to add more Roar 920 as required until the abrasive marks have been removed. For and improved gloss finish, use Roar 950 and Roar UV Wax Features & Benefits Fast Cutting Action – Permanently removes from P800 or finer sanding marks on the most production and tooling Gels Permanent Gloss Finish – Superior gloss finish in 1-step even on difficult colours Easy to Use – Water based – Low VOC and safe to use HAZCHEM LABELLING The product is not classified under GHS/CLP. Typical Physical Properties Colour – White Odour – Characteristic Odour Appearance – Semi Liquid pH – 7.80 Specific Gravity – 1.10 Viscosity – 35,000cps – Brookfield @ 20oC VOC – 245g/Litre Shelf Life Roar Products are guaranteed two (2) years shelf life when unopened Storage and Handling Store at room temperature. Protect from frost. Shake container prior to use. Additional Information Professional users may refer to the Material Safety Data Sheet for this product available upon request. Limited Warranty ROAR Products (UK)Limited warrants this product for a period of two (2) years from the date of purchase by the first user.
